Viablue SC-4 Jumpere T6s Spader

ViaBlue™ SC-4 Silver-Series speaker cables have silver-plated strands for the treble range and tin-plated strands for powerful playback of the bass range. SC-4 Silver-Series speaker cables have a transparent and three-dimensional acoustics and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all of the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.

Transfer of complete frequency range supported by special silvering and tinning.

Each of the four 4 mm2 leads of the SC-4 speaker cable consist of 7 bundles with totally 896 individual braids. In order to specialize the sound range for the individual frequency ranges, two of the four leads are silvered and two leads are tinned. Through the combination of silver-plated and tin-plated leads, finest details and brilliance of the treble range as well as the lower frequency signal of the bass range are completly transfered and powerfully reproduced by the speakers. The two silvered leads are connected with the high tone range of the loudspeakers. By the silver plating finest details will be transfered in the high tone range. By tinning two of the four copper wires, the low frequency signal in the bass area is transported completely and lets the speakers' bass pressure sound powerful. The two tinned copper leads are connected with the low range of the loudspeakers.

The chain is as strong as its weakest link. Completion by the use of cable bridges.

ViaBlue™ SC-4 Silver-Series jumpers are used to connect bi-wire-terminals of loudspeaker boxes loss-free. The indicated lengths refer to the visible cable between the connectors.

DESCRIPTION:  
• SC-4 JUMPER BRIDGES T6s Spades

OUTTER DIAMETER  
• CA. 8.0 MM

CONDUCTOR CROSS SECTION:  
• JE 2X 4 MM2

STECKER:  
• CRIMP SLEEVES

FINISHING:  
• SILVERED / TINNED

INDUCTANCE:  
• 0.63 µH / M

UNIT:  
• 2 PAIRS

MARKING:  
• BLACK / RED

PLAY IN TIME:
• APPR. 30 HOURS